How to care for your Hunter high impact drill

We all know that the drill is a fundamental tool in any workshop, whether for DIY, home repairs or professional work. To keep a drill in perfect condition, it is essential to pay attention to its maintenance and care. If properly maintained, a drill can last for many years.

Tips to leave your drill in a perfect shape
Regular cleaning

Cleaning is one of the most important aspects of keeping a drill in good condition. After each use, it is important to clean the drill to prevent the buildup of dust, chips, and other debris. To do this, you can use a brush or a soft cloth to remove any remaining material. Compressed air can also be used to clean the inside of the tool.


Lubrication is another important factor in keeping the drill in perfect condition. Most drills have moving parts that require lubrication to prevent friction and wear. Lubrication also helps protect drill parts from rust and corrosion.

It is important to read the instruction manual to know what type of lubricant to use and how often. It is advisable to lubricate the drill after each use.

Proper storage

Proper storage is essential to take care of our drill. When not in use, the drill should be stored in a dry, safe place to prevent it from becoming dirty or damaged. It is advisable to use the storage box that is included with the tool to avoid damage to the bit or other parts of the drill.

Checking belt tension

The belt is one of the key components in the operation of a drill. If the belt is too loose or too tight, it can affect the performance of the drill. Therefore, it is important to check the belt tension regularly.

To do this, you must disconnect the drill from the electrical power and remove the belt cover. The belt must be adjusted for proper tension. If it is too loose, it should be adjusted to make it tighter. If it is too tight, it should be loosened a little.

Checking the brushes

Brushes are the components that transfer electrical energy from the cable to the drill motor. If the brushes are worn or damaged, the drill may malfunction or even stop working. Therefore, it is important to check the brushes regularly.

To do this, you must disconnect the drill from the electrical current and remove the brushes. If they are worn or damaged, they should be replaced immediately.

Drill bit inspection

The drill bit is the piece that is used to drill the material. It is important to inspect the drill bit before each use to ensure that it is in good condition. If the bit is worn, damaged or dirty, it can affect the performance of the drill and reduce its life.

To inspect the drill bit, it should be removed from the drill and carefully examined. If the bit is worn, it must be replaced. If it is dirty, it should be cleaned with a brush or soft cloth.

Proper use

Proper use is essential to keeping a drill in good condition. It is important to follow the instructions in the manual and not force the tool. Forcing the drill can cause the motor to overheat and shorten its life.

In addition, the appropriate drill bit must be used for each type of material. Using the wrong drill bit can damage both the drill bit and the drill.

Replacing worn or damaged parts

If any part of the drill is worn or damaged, it should be replaced immediately. The drill should not continue to be used with worn or damaged parts, as this may affect the performance of the drill and endanger the safety of the user.

It’s important to keep a supply of replacement drill parts, such as brushes, bits, and belts, so you can replace them quickly if necessary.

In short, in order to keep our drill in perfect condition, it requires regular and adequate maintenance. It is essential to clean the drill after each use, lubricate moving parts, check the tension of the belt and brushes, inspect the drill bit before each use, use the tool properly, and replace worn or damaged parts in a timely manner. By following these tips, you can extend the life of your drill and ensure optimal performance.